Thermal Mass Air Velocity and Air Volume Transmitter-FTM06C-A

● Thermal mass flow, quickly response, good sensitivity
● Turndown ratio 500：1, high precision & accurate sensing at lowest flow rate for metering applications
● Display Cumulative flow / Instantaneous flow
● Output：Analog / RS-485
● Use measured with square pipe or 2" pipe above
● IP rating：IP65
● Stainless steel casing, suitable for various severe environments, such as slightly corrosive air

Input type：Pt20/Pt300 (Air velocity) / Pt1000 (Temp.)
Measuring range：0 ... 5 m/s ... 0 ... 60 m/s,0-90m/s...0-120m/s(FTM06D)
Min. measuring range：0.1 m/s
Turndown ratio：500：1
Installation angle effect：＜3% of the measured value(When the installation angle＜10°)
Output：4 ... 20 mA & RS-485 / 0 ... 10 V & RS-485 / RS-485 & Impulse
Preset output：Out1：Air velocity
Signal connection：3-wire
Accuracy：±1.5% (Option±1%)
Temp. influence：0.1% / °C
Repeatability：0.5%
Power supply：DC 24 V±10%
Measuring medium：Air
Operating Temp.(With body and display)：0 ... +50°C
Operating Humid.(With body and display)：20 ... 90%RH(Non-condensing)
Probe operating Temp.：0 ... +120°C(Max 200°C)
Storage Temp.：-20 ... +60°C
Storage Humid.：0 ... 95%(Non-condensing)
Probe pressure：16 bar

Installation
Flange：Metal flange mount
Thread：R1/2" metal connector
Flange pipe：Flange pipe

Certification：CE
IP rating：IP65
Electrical protection：■ Polarity protection ■ Over-voltage ■ Short-circuit

Material
Cover：PC(Display) / SUS 304(No display)
Body (including probe)：SUS304
Filter：SUS304
Weight：500 g(w / o cable)

 datasheet-ftm06c-a_en-5TM06C.pdf

 datasheet-FTM06-cn-5TM06.pdf

  FTM06_Declaration of conformity CE_US100210032023FTM06.pdf

 FTI-ftm06-series-operation-manual_en_20210811.pdf

 datasheet-FQ100-cn.pdf

Compressed air monitoring / Exhaust gas emission flow monitoring / Special gas process / Semiconductor 

/ Electronics factory / Industrial process air velocity and air volume measurement